• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to enter and go out of the home at their own pace is a good idea to keep it mentally and physically active. A flap can help reduce toileting incidents by making it easier for the cat to leave the house if necessary.

Take a measurement of the door

A cat flap in upvc door panel flap allows your pet to move around as they want without having to open the door. This is ideal for keeping them in when you're home or away, and helps keep unwanted pests from the house as well!

You should examine the door's measurements to ensure you get the right size cat flap. There are a variety of sizes available. You can then ensure that the cat flap is the correct size for your door made of upvc. Otherwise, it could be too large or too small and your cat may have difficulty using it.

Use a ruler to determine the width at several points along the edge of the door. Also, you should measure the door's height in a few places. A door that is too high can cause your cat to perform an exercise routine every time it wants to use the flap.

If you're not sure of how to measure the door, it could be best to ask for assistance from a glazier or someone who performs this kind of work often. They'll be able to determine if your door is suitable for cat flaps and can advise you on what size flap you should purchase.

Once you've got your measurements, the next thing to do is to mark out the shape of the hole on the door. This will assist you when you're cutting the hole and save you money!

Make sure to put the hole in the right position. If you're installing a cat flap to the patio back door with cat flap fitted, it is crucial that the hole does not get too close to the hinges. This could lead to leakage or issues with the seal.

If you have glass doors you could want to leave this task to a glazier. It can be difficult to install a cat-flap within an existing pane. It is also possible that it cracks and loses its weatherproof seal.

Measure the Cat

A cat flap allows your pet to come and go whenever they want without you having to leave him on his own. It can also stop draughts entering your home, which is not beneficial for your cat or you.

However, if you own a uPVC or composite door, it may be difficult to install the cat flap installation flap. These kinds of doors are usually constructed from different materials than standard wooden or uPVC doors, and the installation process is different, too. Make sure you check with the manufacturer if the door is compatible before you install the cat flap on your uPVC composite or uPVC door. Modifications can cause warranty issues.

These doors are generally designed to last and are tough and have insulation. They are more resistant to the elements than other kinds of door, but it can be difficult to install a cat flap. If you're not sure if your uPVC or composite door will accommodate a cat flap, consult with a professional jointer prior to beginning.

You'll have to measure the height of your child to make sure they pass through the door. It is easiest to measure their height when they are calm or asleep, so they aren't moving around. Once you've determined their height, take a measurement of the distance between their stomach and the floor to determine where the bottom of the cat flap needs to be. You can then mark this location on the door.

If your uPVC or composite door is made of metal (either steel or aluminium) you'll need to be extremely cautious when cutting it with power tools. Cutting into metal can cause cracks, especially if the area is composed of toughened glass. This is why it's highly recommended to employ a glazier when installing your cat flap inside a pane of glass. This will stop the glass from shattering or becoming fragile. A glazier will also be capable of providing you with a circular cat flap that is less likely to break and safer for your cat to use.

Cut the Hole

A good quality cat flap should come with a template drawing that can be used to mark the area on your door where the hole should be. If it doesn't, you can create your own by using a thin piece of paper (tracing papers are perfect). Once the shape has been penciled in on the door, you can use your spirit level to make sure it's horizontal. This will ensure that your cat flap sits properly in the opening and will not open or close.

Then, you can use your jigsaw and cut the shape drawn on the door. Make sure you are using a blade that is suitable for use on uPVC doors - usually it will be labelled accordingly however, if not, ask the staff at your DIY store for assistance. Once you have the hole made, place the flap section up against it and push it open to make sure that the action of the flap is smooth. If it becomes stuck at any point, use a file or rasp to fix it.

Verify that there aren't electric or gas pipes in the door you're going to cut into. Your jigsaw could damage them. You should also be aware of any handles or other fixtures that are on the door that will need to be removed in order to install the cat flap. Be cautious not to scratch these objects while cutting.

Most people who fit a cat flap themselves will have a standard solid uPVC door and so will not have to worry about any of these problems. If your door is constructed of wood or has a decorative piece that is not easily removed, this will complicate the task.

For these kinds of jobs, it is important to get advice from a cat-flap fitter. It is crucial to complete the job correctly to avoid future problems. It is essential to do it right because getting it wrong could damage the door and invalidate the warranty.

Fit the Flap

Once you've got the hole drilled, place the flap on to test whether it will fit and opens easily. If you spot any areas that catch or stick, file them down with a hand file or sandpaper until it fits properly and opens without any problems. Make sure the flap sits in a flush position with the door.

Some kits include an example of this, however, if it doesn't provide a template, you could use a piece or thin paper instead, something like tracing paper ideally. Place the paper on the door and draw fitting a cat flap In a upvc door line to show where the flap should be placed (this will serve as a cutting guide). Then, using the pencil lines you've made on the door, draw four screw holes in each corner of the flap. These will be the screws that you'll use to secure the flap into place.

The majority of uPVC doors are solid and therefore simple to cut into. If your door is made of GRP or composite the process can be more difficult. If you're not familiar with this, it's recommended to consult an expert. They will also be able to tell you if your door is suitable for the installation of a cat flap.

If you want to install a cat flap in composite doors, you need to first check with the manufacturer or a professional joiner. Any alterations made to these doors could cause the warranty to be void. If you decide to do the work yourself, keep in mind that it could be messy and may even be hazardous.

With composite doors, you'll typically need to use a grinder or saw to cut through the door's frame rather than just through the GRP. Be aware that this can be a very hazardous job and you'll have to take extreme care not to hurt the door or yourself as it's extremely fragile. It's also important to note that cutting holes into any kind of glass door is a lot more difficult than making the same changes in the case of a uPVC or solid wooden door.