• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Do a Door Lock Change

Change of the door lock is a simple and affordable way to improve your home security. This isn't for everyone. It requires a certain amount of patience and expertise.

The cylinder is inside the knob body. The cylinder is responsible to recognize the key when it is put into the lock.

Remove the old lock

The first step is to remove the lock you have been using for a while. It's a straightforward process, however you should keep certain things in mind. First, make sure that your new lock is the right size for your door. This will ensure it fits securely, and doesn't leave a gap at the latch or deadbolt.

Once you have removed the latch plate look for two screws or bolts on the inside of the casing that secure the casing and two halves of the lock together. Remove them with a screwdriver, then take the lock out of the door. If you have a mortise locking system there is a set screw that holds the handle to the spindle. Use a screwdriver to remove this screw, then pull out the doorknobs.

You should also take the deadbolt and latch plug from the hole in the door jamb. Install the new lock. If you are replacing a mortise you must take a measurement of the distance between your lock case and your door edge to ensure that the new lock will fit.

You may want to replace window lock (https://postheaven.net/hipwedge14/why-all-the-fuss-Upvc-door-lock-replacement) your lock for a variety of reasons, such as if you suspect that someone else has the key or if you have an incoming roommate. In any case, you can save money by taking the lock off yourself, rather than hiring an expert to do it. The process is simpler than many people imagine, and it can be completed in just a few minutes.

Remove the trim and handle from your door. With a flat screwdriver, remove the trim. You should be able twist off the majority of it. In some instances, you may even be able to remove the handles completely. The next step is to look for a hole on the inside of the handle and insert an unstraightened clip into it. This will trigger the release mechanism, allowing you to remove the handle. Next, examine the inside of the lock for a small tab, and then press it with a flat screwdriver. After the spindle has been removed, you are able to remove the housing and the cylinder.

Making a decision on a new locking system

There are a lot of options available when it comes to selecting the right lock. Take a look at the various types of locks and select one that fits the style of your door. Consider the backset which is the distance between the edge and the middle of the hole in the lock. Also, consider the cross bore, a tiny hole that is located at the edge of your door frame. Choose a lock that fits the door thickness and swing.

The American National Standards Institute and BHMA have graded the majority of locks for doors to give you an idea of their strength and the difficulty to pick them up or disable them. A grade 3 lock could be the best choice for a peaceful urban apartment complex, whereas an entry grade lock could hold up better to the traffic near a busy storefront on a busy city street.

Most smart door locks require a digital code to open. If you're worried about hacking or other security concerns you should consult a professional locksmith or the local police department for advice.

Replace the cylinder

If the cylinder of your door lock is broken or damaged it can be replaced in a matter of minutes by completing a do-it-yourself project. It is essential to choose the right cylinder and follow the instructions. The first step is to remove the knob or handle, if there is one then loosen the trim around the base of the lock cylinder with the aid of a screwdriver. Once the trim is removed, you will be able to access the screws that hold the cylinder in place and remove them using a flathead screwdriver. The cylinder is then gently pulled from the door.

Be sure to take measurements of the length of the new cylinder before installing it. Find the distance from the center to the right and left sides of the cylinder using an instrument. Then, buy a new cylinder with the same measurements. This will prevent the cylinder from snapping, which can happen when the door is kicked out or when the key is stuck inside.

If you have a suitable upvc window replacement lock cylinder, place it in the door and turn the key. This will align the cylinder with the carrier that is usually located on the outside of the lock. Then, loosen the set screw that should be a few turns inside the head. If there is a screw on the exterior of the case, which holds the door, you will need to loosen it.

After removing the lock cylinder and replacing it with the new lock by slipping the new cylinder into the case and tightening the set screw. Installing the part that connects the cylinder to the stem of a lock indicator is also crucial. You can do this by pulling three small tabs at the back of the cylindrical with needle-nosed pliers. Attach the bracket that is smaller to the back of the cylinder. You should then reinstall the strike plate and latch plate, as well as the retaining rings connected to the top of the lock the cylinder.

Installing the new lock

Start by measuring the door's width if are replacing an existing lock. Most locksets for residential use have a thickness of 1 3/8 inch to 1 3/4 inches. If your door is thicker you will require a thick door kit that includes longer screws and a longer tail piece (for door knobs) or spindle extensions (for deadbolts).

The majority of locks come with a detailed instruction manual to assist you in installing the new hardware. Before you begin, read the instructions to make sure you've followed all the steps. The booklet will give you a good idea of how much skill is required to complete the task. It is possible to ask a person who has experience changing locks for assistance if you are changing a lock the first time.

It's a great idea to seal the openings of the old hardware before installing the new lock. This will stop the screws from slipping through the holes, and protect any tiles you might have installed. It also shields your tiles from damage caused by rust, dirt and grime. SECURAM Touch includes an ad-hoc strip of masking tape or gaffer tape. However, you can use any tape you have.

After you have removed the screws holding the inside of the lock section to the outside side, pull it straight away. It is important to do this quickly to prevent the lock from accidentally closing and damaging the mechanism.

If your new lock has an latch bolt, install the new bolt into the upper cross bore. Make sure that you put it in the correct position as indicated by an illustration on the faceplate. Then, screw the latch plate onto the bolt.

Screw the deadbolt into the jamb on the door lock window repairs. Check the deadbolt several times by throwing it to see if it extends into the strike plate. Follow the directions included with your electronic smart lock to program it. This requires downloading an application and registering your e-mail address, verifying your identity and connecting to the wireless network in order to add your device.