• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

It may seem difficult to set up the flap for your cat but with the right instructions, it's not too difficult. Decide how high you'd like your cat flap installers flap to be (normally it's at belly height). Mark this point on the door and then use the template provided as a reference to drill.

If you have a kitten, or a young kitten hold the door open a bit and gradually encourage it to enter. Reward the kitten every time it passes.

Measure the Door

A cat flap is a great method to let your pet leave and come into and out of your home as it likes. This can help keep your cat flap fitting healthy by making sure that it gets exercise and also being able to get back inside if left outside in the rainy weather, especially during the winter. This will reduce the amount of time you allow your cat out or in, and keep your home safe by notifying you when it has left.

It is crucial to make sure that the cat flap is set up properly to stop your pet from being forced through through it by other animals (e.g. dogs). It is important to measure the height of your pet's belly and the width of the doorway in your home to ensure that the flap is at the right height. If your cat is a little longer or taller than the normal, you can adjust the flap's height by moving it upwards or downwards by a small amount.

Then, use a spirit-level to mark the middle of the door. This is where you will install the flap. Then, using the markings as an outline, cut the shape of your flap on the door with the help of a jigsaw. After cutting the flap then sand the edges to create smooth surfaces. Drill any holes you need to.

The process of installing a cat flap is not as difficult as you believe and it shouldn't take more than two hours to finish the entire job from start to completion. The process is slightly more challenging if you need to install it on the form of a uPVC door cat Flap step or composite one. This is due to the fact that these doors come in a variety of thicknesses, which can affect the way the holes are cut. This is why we always recommend calling a professional to carry out the job, particularly if you have never worked with glass before.

Measure Your Cat

A cat flap can spare you from hours of listening to your pet meow to let it out or in. This is particularly useful if you are at work all day and your cat has to stay in the waiting room until you come home in any weather.

It is important to measure your cat's measurements first before attempting to install. While it may seem an easy task, it is important to measure the right way or your cat may be unable to use.

First, make sure your cat is calm before taking measurements. You'll need to keep them in a way that they cannot move and make sure that the measuring tape or ruler is flat against their body, not bending in any way. You can get an accurate measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you've got your cat's measurements then you can examine the door to determine where to put the flap. The best option is to place the flap on the highest point of your cat's belly because this will help them to move through it without too much effort. This will also avoid the flap making a lot of noise as it swings open and closed.

You will also need to think about the thickness and the structure of the uPVC door or composite. While timber doors are of a similar thickness, uPVC and composite doors may differ in their overall construction, which can make fitting the cat flap more difficult since you have to ensure that the hole you make is the proper size for your pet.

It is also worth looking through the instructions included with the cat flap kit to locate a template drawing that can be used to determine the location of the hole inside the door. This will enable you to determine where the hole must be located and make sure that the template is placed correctly on the door. It is also beneficial to use a spirit-level to ensure that the template is in a straight line against the door.

Cut the Flap

Before you can install your cat flap, you'll must cut the door panel to create a space large enough for it. This can be a daunting job, so it's recommended that you engage a professional to help you if you lack the expertise or experience. You can also consult the instructions that come with the kit to learn how to do it properly.

You can use the height of the cat flap bifold doors's or kitten's stomach as a guide. A good guideline is to put the flap of your cat about 10 centimeters off the ground, as this is approximately the average belly height for cats. This way your cat will be able to move through the flap with ease and also give other cats or snooping neighbours an issue when trying to leave or enter.

The position of the cat flap on the door using the pencil. If your kit includes a paper template, lay it over the door and use the markings to drill holes in each corner of the template. Then, you should be able cut out the template shape and replace it with the cat flap.

You can install the cat flap yourself in an uPVC or wood door when you're confident using the Jigsaw. Be sure to not cut into any of the door's mullions or vertical rails. You can use a jigsaw cut the panel into a circle or square depending on the design of your cat flap. Remember to take your time and don't make the jigsaw cut faster.

Once the hole is made, carefully place the Cat flap step flap into its new place of residence. Make sure it's firmly secured. If it features caps for screws, then put these caps onto the screws that protrude. After the screws are installed, sand the rough edges and then apply sealant to any gaps. This will stop draughts from entering your home.

Place the Flap

If you have a basic cat flap you can leave it open and encourage your pet to walk through by putting a small amount of cat food in the front of the door. Alternately, you can push the cat through with your hands or a stick. Once your cat is used to moving through the flap, it should be able to go into and out as it wants, so you can let it in or out without keeping the door open for it all day (and possibly in any weather).

It is possible to install the flap inside the UPVC doors or glass door, however it's not as simple as putting one inside a wooden exterior door. This is because UPVC doors and some types of glass doors do not have an even thickness. This could have a significant impact on how you cut the flap's hole, and whether the flap will fit correctly after installation.

The mounting kit might include a template showing you the best places to drill holes. If the kit doesn't include an example, you can photocopy it to make your own. It's important not to use the jigsaw to in order to cut, so it doesn't make a larger than needed hole in your door.

Some cat flaps are available in circular shapes, which can be more difficult to put in. If you have a circular flap, ensure that the hole is located in the right place on the door. Otherwise, the cat may not be able to use it, and may be stuck outside the whole day (or at night).

Certain cat flaps come with locks that allow you to determine when your cat enters and leaves. These are useful if your pet is afraid of leaving in the dark, or coming back door with cat flap fitted to the house at night. They can also be helpful when you are working all day. Some locks can be used for access or exit, and others can be locked both ways. This is beneficial for sick or older cats who aren't keen to venture out in cold weather.