• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don't be concerned. Replacing a window handle made from upvc is a relatively simple task and can be completed in just a few steps.

If you have a cranked or in-line espagnolette type of window handle, they all feature a square spindle that extends from the back plate and is inserted into the locking mechanism.

Determine the type and size of the lock and handle

Over time, window handles or locks can get damaged and lose functionality. It is possible to fix this issue without having to replace the entire uPVC unit. The first thing to do is to identify the size and type of your handle and lock. This will allow you to determine the replacement parts that you need.

You can identify the kind of handle by looking at its base. A screw or pin is what holds the handle to its base. If the screw is gone it could be a sign the handle has separated from the base. If the handle has been split in the middle and no longer grips onto the spindle, it could also mean that it needs replacing.

There are many uPVC handles however the Espag handle is the most common. These are typically fixed using two bolts, and come with a spindle that engages the lock mechanism in the window frame. These handles are used on uPVC tilt and turn windows.

Cockspur handles are another kind of uPVC handle. Similar to the Espag handle, but they have a lower projection from the frame. These handles are generally used on older uPVC window frames.

Finally, there are also Venetian window handles that are similar to the Espag handle, but have a flat base that allows them to be fitted flush with the frame. These handles are a great option for homeowners who are looking for a stylish handle that will be a perfect match with their uPVC frames. The handles are available in a range of colors that can match any design.

Take a measurement of the spindle

It is crucial to know how the handle is installed before you can order an replacement. This will tell you how tight or loose it is and if it will be able to fit into the window frame. This can be determined by identifying the handle's type and determining the spindle's measurement. The spindle is a metal shaft that connects your handle to the lock inside the window frame. It's available in a variety of sizes and the current industry standard being 8mm. Older handles might have a 9mm cross-section therefore it's important to determine the cross-section of the old one to make sure you get the proper size replacement.

There are several types of window handles. However, the most common are inline Espagnolette and the cockspur handle. These handles operate with a locking mechanism inside the window, windowreplacement (http://www.annunciogratis.net/author/cookegypt96) using shootbolt rods that secure the window when it's closed. Depending on the type of handle, they are held in place by pins or screws.

You can find replacement handles for windows made of upvc online and in a lot of DIY stores. They come in a range of finishes and are suitable for new and replacement windows. For added security, they can be either key-locking or non-locking fire-escape.

To take off the handle, simply open the window to the door and remove all the screws holding it in place. Be careful not to damage the screws and keep them safe in a container to be stored for future use. After the screws are removed, gently pull out the handle and measure from the base to the top of the spindle. This will provide you with the information needed to buy the correct replacement. The spindle of the handle is the iron shaft connecting it to the gearbox that locks the window frame.

Remove the handle that was previously used

Switching a uPVC window handle is a straightforward task and usually will take less than five minutes with the proper tools. The first thing to determine is the size and type of the handle or lock. This will allow you to select the appropriate replacement window. After that, measuring the spindle will help ensure that the new handle is a perfect for the job. In the end, you'll need remove the handle you have been using and replace it with the new one.

The majority of uPVC handles come with inline Espagnolette handles. These handles feature a central spindle which slots into the locking mechanism of the window. These are generally easy to remove, however you may require force to remove them if they're stuck. The handle is typically fixed by two screws which can be removed using a screwdriver. There may be a need to remove pins, based on the type of handle.

After you have removed the screws, you can remove the old handle. The top of the base plate will be visible once the handle is in an open position, revealing two screws that can be removed. There's also small silver or another colour sticker that needs to be removed if it's in place.

You can now put into the new handle using the screws from the old handle. The screw holes should be aligned on the window with the holes in the handle. After this is done you can put on the caps on the screws and then test the new handle to ensure that it works properly. Changing a uPVC window can be a simple and quick job, but it's important to make sure you complete it in a proper manner.

Fit the new handle

It's time to install your new handle if it has been successfully removed the old handle from the frame. Start by locating and removing the screw covers with your screwdriver. Once removed, place them in a secure place and move on to the next step.

Then, insert the new spindle into the handle by lining it up with the existing hole and screwing it into. Make sure that you align the holes of the handle with the holes in the window frame. You should make use of a screw of the same length as the ones previously used or it could cause the handle to not being secure.

uPVC Espag handles come with a 7mm square spindle that rotates the lock mechanism that is installed to the window. This kind of handle can be present in the majority of modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) have long noses that lock over the frame's outer or transom bar cross members and are typically found in older windows made of uPVC.

It is important to lock and unlock the window several times after the handle is installed. If everything goes to plan, your replacement uPVC window handle should now be securely attached and operating smoothly. If you are experiencing any issues these steps will assist you identify the issue and fix it quickly. If you're having trouble with your uPVC handle or any other problems with your glazed home improvement do not hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers can repair or replace various window frames and handles. This makes us an ideal choice for double glazing.

Test the new handle

Over time, uPVC handles become damaged and worn out. This can leave them less secure and effective, so it's important to replace them as quickly as possible. It's also recommended to do this when you upgrade your windows, as changing your lock and handle will ensure the security of your new windows.

When it is to uPVC window handles, there are a number of different styles. Some are fixed by pins or screws, whereas others have blades that slot into the lock mechanism. Each type has its own method of replacement, so it is important to know which kind you have before you start working on it.

Espag window handles are the most popular type, and they're typically found on newer uPVC windows. The spindle extends from the handle to the lock gearbox and activates the locking mechanism when you open the window. They're also easy to remove however you should take care not to damage the mechanism or the handle when doing so.

Cockspur handles are another alternative to uPVC window handles. They're held with a spur that hooks onto a wedge-shaped striker plate on the frame. When you close or tilt the window, it triggers the locking mechanism. This kind of handle may be more difficult to repair than others, but is nevertheless a great option for most homes.

Venetian handles are attached to the frame using two bolts, and they have a low projection on the frame. This differs from the Espag handle. These handles are ideal if your goal is to have a flush handle which blends into uPVC window frames. These are perfect for commercial and residential properties.