• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall onto the fabric instead of landing on the floor where they can be trodden under and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap between the door and the window is significant, you may need to consider security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. In time, they could be affected by a variety of issues that include sliding. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window to get to the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and verify the fitting. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window repair watertight and draughtproof.

uPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close your window and do an initial test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's important to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in an ease. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's easy to change the hinges on a window however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of improper installation in the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you advice.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges may also become misaligned due to wear, creating gaps where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, may also be misaligned, and again it may be feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will lessen draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be put on top of your windowsill. They will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as possible.