• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles For Bifold doors

Door handles are a key part of the decor of your home. A new handle will bring your home's decor and interior up-to-date.

Over time the knobs on your bifold door handle replacement could become stiff or even break. These are indications that it's time to replace the knobs. This guide will help you select the correct door handle replacement for your home.

Door Knobs

Door uvpc window handles add to the look of your home while also making it easier for people to open and shut doors. They come in a variety of colors, finishes and types of window handles to match your decor. If yours are starting to appear worn or you just want to upgrade, replacing them is relatively easy and can be accomplished in a couple of steps.

You must locate the spindle, or shaft, through which the knob is inserted to the door. Some have a small hole that you can insert the screwdriver with a small diameter to loosen the set screws that hold the handle in place. Some have a tiny slot or hole through which you can use to press a spring-activated detent pin with a flathead. This pin lets go of the latch mechanism, and lets you pull or push the knob.

Once you have access to the shaft or spindle take the knob off of the door and replace it with the new one. Align it correctly and check that the latch functions properly before tightening the new set screws.

After you've replaced the knob, place the latch rod in position over the door's hole and lock it in place with the rod mechanism on the second knob. Ensure that the holes are in alignment, then tighten the screws on the latch plate.

Some people opt for a smooth or brushed finish on their door hardware to give it modern, sleek design that matches other furnishings in their homes. Others prefer a more rustic look which is great for rustic-styled rooms. If you have family members with mobility limitations, you may think about the rim lock or lever style door knob, which require less pressure to operate.

While aesthetics have been the main consideration when it comes to door handle design, other aspects are being taken into consideration too. Accessibility and control of infections have been key issues in the creation of new designs for handles. For instance, some handle designs can be operated by the arm of a person.

Latch

The latch that holds the handle of your door open will wear down as time passes. The replacement of the latch to make room for an entirely new handle can be an easy DIY project and will make a significant change in the way your door opens and closes.

Depending on the kind of knob you are using depending on the type of handle you have, the latch may be part of the knob or it could be an independent piece attached to the door itself. In either scenario, the same procedure to remove and install is applicable. It's simple to remove the old latch, especially if you have doors with a "magic" button. The tiny pressure-slot, which is located on the side knob is the one you'll have to press to pop the latch out of the handle.

If your handle doesn't come with this button, you will need to remove the cover plates that are placed over the latch plate. They are typically rectangular or circular and can be removed with a screwdriver. Some have a slot where you can place your screwdriver. Other handles just snap off.

The next step is to loosen the two machine screws that hold the latch and the plate to the victorian door handle handle. These are the shorter screws with a pointy tip and you'll need to keep these in a safe location to reuse them in later steps. Once the screws are removed, you can remove the latch plate and mechanism from the hole and set it aside.

Now you can start on the new latch. Place the inside of the latch into the hole in the door and secure it using the hardware provided. Make sure the square pin that is on the interior of the latch is pointing towards the latching mechanism inside the handle and that it is lined up with the other screw chambers of the door handle. Then, push the outside latch plate onto the handle and secure it with the screws provided.

Strike Plate

One of the most frequent reasons for replacing the door handle is because it is loose or isn't locking properly. This is usually caused by malfunctioning parts of the latching mechanism, such as a striking plate that's either too short or has moved up or down on the doorjamb as time passes. This project allows you to replace your old strikeplate with an extended one, which will offer better security for your door and will keep it closed.

Apply a lipstick or another marking material on the bolt that you are using to determine if it's the strike plate. Close the door and try to latch it. If the mark is lower than the strike plate's hole, it means that the plate is too small and the door will not latch. If the mark is higher or below the strikeplate hole, the strikeplate may have been moved up or downward on the doorjamb.

Depending on the external door handles, you may be able to just install the new strike plate into the door over the old one, using the screws included with it. You may need to drill holes first, and then chisel some wood out to ensure a secure fit. If this is the situation, be careful to not chisel out too much wood or you could damage the strength of the doorjamb.

Installing a new style box strike plate will provide the lock with a stronger hold on the doors and will require more force to open the doors. It typically requires two longer screws to anchor the strike plate in the door frame. To accomplish this, you'll need to remove the existing strike plate, then drill and chisel the wood to make space for the new one.

This rare strike plate is made of solid brass and has a thick, heavy-duty. It's designed to be used on antique rim locks. This kit includes wood screws as well as machine screws so you can select the appropriate hardware to suit your requirements. Make sure to note that wood screws have a sharp tip, whereas the machine screws are more blunt.