• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are several reasons why your car ignition may be locked. One reason is that the key is dirty or has a broken wafer inside. This can be fixed by sliding the key into and out of the cylinder multiple times.

The pins of the lock cylinder could also be stuck. You can use a small tack hammer to gently tap the cylinder to loosen the pins.

Check the Battery

If your car is in Park or neutral but it doesn't turn on when the key is inserted into the ignition, it may be an issue with the shifter switch for the transmission. It is possible to fix the issue by shifting the gear shifter upwards or downward to get the car into the gear.

If it's still not turning, the problem could be related to the neutral safety switch, or the transmission shifter cable. A mechanic or a local auto locksmith can easily fix these problems.

It is also possible that the ignition cylinder is worn out. In time both the ignition and key can wear out, making them difficult to insert or remove. A lubricant such as silicon lock grease can solve this issue, letting the wafers to slide into the proper position.

The filth from your pockets and adhesive from tapes that hold packages together can also build up on the key, which prevents it from being able to slide into the ignition. To resolve this issue try cleaning the keys with a cloth or using a cleaner, such as Triflow. You can also test a spare key to determine if the issue is with the ignition or the key.

While the key is in the ignition, you can tap it with the hammer with a small amount. This will cause a small vibration, which could be enough to loosen up the wafers inside the ignition and allow them to slide in place. You must be cautious not to scratch the ignition cylinder or the key.

If all of the above options are unsuccessful, it's time to contact a locksmith automotive mechanic to have it looked at. It could be that the key is broken in the ignition, or it could be the time to replace the whole thing. If the problem is with the key, a locksmith will be able to create a new key for you. If the problem is with the ignition lock repair cylinder, the car is required to be brought into a repair shop to have it replaced. These issues are usually simple to fix.

Check the Steering Wheel

A locked steering wheel can cause the ignition to stop turning. It can happen if a driver accidentally engages the steering wheel when they exit or enter the vehicle. This usually happens by yanking the wheel while being able to hold it against their body. It can also happen when someone in the back seat is unable to stop it when they exit the car.

Luckily it's a simple fix that does not require a trip to locksmiths or mechanics. First, make sure that the gear shift is either in Neutral or Park. If it's not, gently push or pull the gear shifter until it moves to one of these positions. It is also essential to press the brake button or activate the handbrake prior to trying to turn the key.

If the wheel isn't locked, a quick look at the steering column will tell if the key has been engaged with the lock. A small "Lock label can be located in the lower part of the ignition circle. You can easily disable this by gently jiggling or pulling the keys with moderate force. It is essential not to apply excessive force since this could damage the key or break off a wafer inside the lock cylinder.

Another option is to use an alternate key to see whether it is able to unengage the lock. This could mean that the key is worn out and cannot engage the wafers inside the lock cylinder. A professional from Karl Chevrolet Webster City can make a new key if this is the case.

If the new key still isn't engaging, a quick spray of oil that penetrates can aid. Simply spray a tiny amount around the ignition, and inserted keyhole, then jiggle or tap it lightly until it begins to work. If this does not work you, you might need to seek out a specialist at your local car dealership. They will be able to provide you with a new key, and will also replace the ignition cylinder, in the event that it is required.

Check the Key

If you are unable to get your key to turn the ignition, it's possible that there is a problem with your key. You can clean any foreign material (lint from packing tape or adhesive) from the key. You could also try the key with rubbing alcohol or Goo Gone to see if it aids.

It could be that the lock pins inside are not moving properly when you insert the key. You can test a spare key by gently pulling it out of the ignition after having insert it. This should let you be able to feel and hear if internal lock pins move as they should. If you don't feel any movement, you can grease them with graphite. You can buy graphite in small tubes which can be put into the keyhole. This should help the pins slide into place when you insert the key, and prevent them from becoming stuck.

A more serious issue with your key may be that it is damaged or worn out, making it unable to connect the internal pins of the ignition cylinder. This can cause the cylinder in the mobile ignition lock repair services to stop turning and prevent you from starting your car. If this is the case you'll need to take your vehicle to an auto locksmith or repair shop for assistance.

If you can turn your car using a spare key, and you have ruled out any problems with the battery or steering wheel it could be because the ignition cylinder has been worn out. Try to open the lock by using an abrasive screwdriver or handle of smaller hammers. Do not use the head. Sometimes, gently tapping the cylinder can free it up and allow you to turn your car ignition locked key. If this doesn't work, you will need to replace the lock cylinder by a mechanic.

Check the Ignition Socket

The ignition socket is where your key slides in and out of position when it is inserted. It is prone to getting blocked with dust, or simply wear and wear and tear. You can inject some silicon lock lubricant into the ignition.

You can also use a small hammer to very gently tap the inside of the ignition cylinder in an effort to loosen or reset the pins that may be out of alignment. Again, be very careful not to overdo this, or you could cause significant damage to the ignition switch.

It is crucial to confirm whether your car's transmission is set to park or neutral prior to attempting this. A majority of modern cars have an option to lock the steering wheel when it is not in neutral or park. This could prevent the ignition key from turning.

If you have done all of this and still not able to get your key to turn it is likely that the housing of your ignition cylinder is in need of replacement. Different vehicles have different methods of replacing the ignition cylinder. Therefore, it is important to follow the correct procedure.

Generally speaking, this involves removal of the plastic cover which covers the steering column and ignition assembly. To remove it, you'll need adjust the tilt-wheel in its lowest position. Then unscrew any fasteners that are holding it in the position.

Once the cover is removed, you'll have to take the old ignition cylinder out of the steering column. Then, you'll need to check the new ignition cylinder that you purchased with the one that was removed to confirm that they're identical. Following this step you can then install the new ignition cylinder in the same manner that you did with the old one.

Sometimes, despite all of our efforts, the ignition can be damaged and require replacement. If this happens, it's recommended that you contact Tempe Locksmith Tempe Locksmith for assistance. A locksmith can help you select the proper replacement and install it properly to ensure that your vehicle can start again.